ELEKIT TU-H82 Hybrid tube amplifier DIY Kit
256,00 € – 291,00 € exc. VAT
Clear sound of solid-state amp and smoothing warm sound of tube amp – this company cubic amp enjoys the good aspects of those two different types of amplifiers. Deck your desk with this sophisticated amp and its pleasant sound. This kit doesn’t need soldering, it’s very easy to assemble and contains ECC82 tube.
Description
Clear sound of solid-state amp and smoothing warm sound of tube amp – this company cubic amp enjoys the good aspects of those two different types of amplifiers.Deck your desk with this sophisticated amp and its pleasant sound.
FEATURES
- Hybrid vacuum tube input buffer + D-class speaker amp (AB-class headphone amp built-in)
- DC-controlled electronic volume built-in the amplifier IC. Therefore the volume deflection between right and left channels at small sound volume is minimized.
- Headphone output
- Built-in USB-DAC for computer connection
- Interlocking the amp power ON/OFF with the PC USB power selectable
- Assembly kit for users to experience the fun of DIY
- PCB is preassembled, no soldering is required. For assembly, users will need a long-nose pliers and a screwdriver only. (A hex wrench is included.)
- Kit includes ECC82 vacuum tube.
TECHNICAL SPECIFICATION
| VACUUM TUBE | ECC82 (12AU7) x 1 |
| INPUT | INPUT-1: 3.5 mm stereo mini jack (front), 170 mV INPUT-2: RCA jack (rear), 470 mV INPUT-3: USB mini-B connector (rear) INPUT-1 and INPUT-2 are mixed USB input is cut when INPUT-1 is connected |
| SPEAKERS | 6 Ω – 8,2 W + 8,2 W 8 Ω – 6,5 W + 6,5 W Gold plated binding terminals (banana plug usable) |
| HEADPHONES OUTPUT | 16 Ω – 8 mW + 8 mW |
| FREQUENCY RESPONSE | 20 – 25000 Hz, -3 dB, 6 Ω load |
| RESIDUAL NOISE | 120 µV (IEC, 6 Ω load) |
| FREQUENCY RESPONSE | 20 Hz – 50 kHz (-3 dB) |
| USB DAC | 32 kHz / 44.1 kHz / 48 kHz (16bit) WindowsXP or later, Mac OSX |
| POWER VOLTAGE | Amplifier: 12V AC Adapter: 100 – 240 V |
| POWER CONSUMPTION | No signal: 0,2 A Rated output: 2 A |
| DIMENSIONS | W 88 mm x H 90 mm x D 117 mm (incl. projections) W 88 mm x H 88 mm x D 88 mm (chassis only) |
| WEIGHT | Approx. 790 g Assembled, excl. AC adapter |
| Specification of the product are subject to change without prior notice. Colors of the product may look different than presented on pictures. | |
Additional information
| Weight | 1,5 kg |
|---|---|
| Dimensions | 24 × 19 × 10 cm |
| Assembly service |
You must be logged in to post a review.
Related products
-
OUT OF STOCK
![]()
Read moreMORE INFOLundahl OPT Upgrade Kit for TU-8200
382,00 € exc. VATLundahl’s output transformers upgrade kit for Elekit TU-8200 amplifier. Famous Lundahl hand-made output transformers are the best choice for this kit and is suitable for all TU-8200 models including the last one TU-8200R.
-
![Przedwzmacniacz lampowy ELEKIT TU-8500]()
Select options This product has multiple variants. The options may be chosen on the product pageELEKIT TU-8500 – Tube preamplifier DIY kit
440,00 € – 596,00 € exc. VATElekit TU-8500 is a tube preamplifier DIY Kit with a phono equalizer (MM/MC). Ideal companion for TU-8200R amplifier. Preamplifier gives four input lines and switchable gain. Kit contains all parts including enclosure.
-
OUT OF STOCK
![]()
Select options This product has multiple variants. The options may be chosen on the product pageELEKIT TU-8550
890,00 € – 1158,00 € exc. VATPreamplifier kit with phono amp, in chassis with size matching to TU-8900 amp series. Among other, it features a CR type RIAA equalizer circuit for straight-forward and smooth sound quality, quadral volume pot, four input lines and two outputs. And as usuall, highest sound quality provided with six tubes.
Reviews
There are no reviews yet.