FORGOT YOUR DETAILS?

MADE IN JAPAN

ELEKIT TU-H82

HYBRID TUBE AMPLIFIER DIY KIT

HIGH QUALITY DIY (DO-IT-YOURSELF) KIT

ELEKIT TU-H82

HYBRID TUBE AMPLIFIER KIT

Clear sound of solid-state amp and smoothing warm sound of tube amp - this company cubic amp enjoys the good aspects of those two different types of amplifiers.Deck your desk with this sophisticated amp and its pleasant sound.

Features

  • Hybrid of vacuum tube input buffer + D-class speaker amp (AB-class headphone amp built-in)
  • DC-controlled electronic volume built-in the amplifier IC. Therefore the volume deflection between right and left channels at small sound volume is minimized.
  • Headphone output
  • Built-in USB-DAC for computer connection
  • Interlocking the amp power ON/OFF with the PC USB power selectable
  • Assembly kit for users to experience the fun of DIY

PCB is preassembled, no soldering is required. For assembly, users will need a long-nose pliers and a screwdriver only. (A hex wrench is included.)

TU-H82 Hybrid Tube Amp Kit

Elekit TU-H82

TUBES

Comes with ECC82 tube

POWER ADAPTER

Universal AC adapter (100-240V) for worldwide use

INPUTS

Two standard audio inputs and USB-DAC connection for direct digital computer audio

HEADPHONES

Headphones output at front

TECHNICAL SPECIFICATION
VACUUM TUBE ECC82 (12AU7) x 1
INPUT INPUT-1: 3.5 mm stereo mini jack (front), 170 mV
INPUT-2: RCA jack (rear), 470 mV
INPUT-3: USB mini-B connector (rear)
INPUT-1 and INPUT-2 are mixed
USB input is cut when INPUT-1 is connected
SPEAKERS 6 Ω - 8,2 W + 8,2 W
8 Ω - 6,5 W + 6,5 W
Gold plated binding terminals (banana plug usable)
HEADPHONES OUTPUT 16 Ω - 8 mW + 8 mW
FREQUENCY RESPONSE 20 - 25000 Hz, -3 dB, 6 Ω load
RESIDUAL NOISE 120 µV (IEC, 6 Ω load)
FREQUENCY RESPONSE 20 Hz - 50 kHz (-3 dB)
USB DAC 32 kHz / 44.1 kHz / 48 kHz (16bit)
WindowsXP or later, Mac OSX
POWER VOLTAGE Amplifier: 12V
AC Adapter: 100 - 240 V
POWER CONSUMPTION No signal: 0,2 A
Rated output: 2 A
DIMENSIONS W 88 mm x H 90 mm x D 117 mm (incl. projections)
W 88 mm x H 88 mm x D 88 mm (chassis only)
WEIGHT Approx. 790 g
Assembled, excl. AC adapter
Specification of the product are subject to change without prior notice. Colors of the product may look different than presented on pictures.

DIY - DO IT YOURSELF

Please remember that this is a DIY kit. It means that YOU will have to build it yourself using assembly manual. The kit includes all electronic and mechanical parts (including tubes and housing) required to build a ready to work, high quality hybrid tube amplifier. This kit doesn't need soldering. There is not included interconnects and the power cable is Japanese type, you will need a proper cable for your country.

TOOLS REQUIRED

Although building this kit is not hard, you will need some skills and tools. A multimeter is not required but can be useful.

  • Phillips screwdriver
  • Diagonal cutter
  • Longnose pliers
  • Scissors
  • Scotch tape
  • Hexagonal wrench

BUY NOW!

CHECK PRICES, AVAILABILITY AND
HOW TO ORDER
TOP