FORGOT YOUR DETAILS?

ELEKIT TU-8500

415,00 571,00  exc. VAT

Tube preamplifier DIY Kit with a phono equalizer (MM/MC). Ideal companion for TU-8200R amplifier. Kit includes brand new JJ Electronic tubes ECC82 x 2.

SKU: EKTU8500 Category:

Description

This is a tube preamplifier DIY kit with a phono equalizer and a lot of great features. Precision phono stage RIAA equalization (CR not NF) supports both MM and MC cartridges. Two low noise OPAMPS (NJM2068DD) are used in the phono equalizer amp circuitry. OPAMP preference are accommodated by use of socket mounts allowing easy substitution of alternative OPAMPS.

Two 12AU7 (ECC82) tubes are used in the line amp stage. Gain is switchable (Approx 1x to 3x). Reduced hum/background noise circuitry includes a low flux leakage R-core transformer, a FET ripple filter for B-power and the tubes are powered by the DC power supply.

Sufficient space has been provided on the PCB for substitution of larger coupling capacitors. Support for 4 different voltage environments including Australia (set during assembly). Ideal complement to TU-8200 power amp.

Kit includes brand new JJ Electronic tubes ECC82 x 2.

TECHNICAL SPECIFICATION

STOCK TUBES JJ Electronics ECC82 (12AU7) x 2 pcs.
OP-AMP NJM2068DD x 2 pcs.
INPUT TERMINAL RCA Jack 4 lines (PHONO, LINE1 – 3)
3,5 mm stereo jack 1 line (LINE3 priority)
OUTPUT TERMINAL RCA Jack 1 Line (PRE OUT)
POWER VOLTAGE AC 100V 50/60Hz, IEC Standard inlet
Selected from 100V, 115V, 200V and 230V upon assembly
POWER CONSUMPTION 8 W
DIMENSIONS W 252 mm x H 73 mm x D 270 mm (exc. projections)
WEIGHT Approx. 3,1 kg (assembled, exc. power cord)
LINE AMP STAGE
– GAIN x 3,1 (9,8 dB) / x 1,15 (1,2 dB)
– FREQUENCY RESPONSE (-3 dB) 2 Hz – 70 kHz / 2 Hz – 280 kHz
– S/N RATIO (IHF-A) 122 dB / 129 dB
– MAX. OUTPUT VOLTAGE 22 V RMS (1 kHz)
EQUALIZER AMP STAGE
– RIAA EQUALIZATION +/- 0,5 dB tolerance (20 Hz – 20 kHz)
– CARTRIDGE MM (LOW) / MC (HIGH) switchable
– GAIN (1 kHz) [MM] 37 dB / [MC] 63 dB
– SN RATIO (IHF-A) [MM] 108 dB / [MC] 88 dB
– INPUT RESISTANCE [MM] 50 kOhm / [MC] 100 Ohm
– MAX. OUTPUT VOLTAGE 7,4 V RMS (1 kHz)

Additional information

Weight 4,4 kg
Dimensions 30 × 29 × 17 cm
Tubes set

Without tubes, JJ Electronic set

Assembly service

,

Reviews

There are no reviews yet.

Be the first to review “ELEKIT TU-8500”
TOP